org.jboss.netty.handler.ssl

Class SslHandler

java.lang.Object

org.jboss.netty.channel.SimpleChannelUpstreamHandler

org.jboss.netty.handler.codec.frame.FrameDecoder

org.jboss.netty.handler.ssl.SslHandler

All Implemented Interfaces:

ChannelDownstreamHandler, ChannelHandler, ChannelUpstreamHandler, LifeCycleAwareChannelHandler

public class SslHandler
extends FrameDecoder
implements ChannelDownstreamHandler

Adds SSL · TLS and StartTLS support to a Channel. Please refer to the "SecureChat" example in the distribution or the web site for the detailed usage.

Beginning the handshake

You must make sure not to write a message while the handshake is in progress unless you are renegotiating. You will be notified by the ChannelFuture which is returned by the handshake() method when the handshake process succeeds or fails.

Handshake

If isIssueHandshake() is false (default) you will need to take care of calling handshake() by your own. In most situations were SslHandler is used in 'client mode' you want to issue a handshake once the connection was established. if setIssueHandshake(boolean) is set to true you don't need to worry about this as the SslHandler will take care of it.

Renegotiation

If enableRenegotiation is true (default) and the initial handshake has been done successfully, you can call handshake() to trigger the renegotiation.

If enableRenegotiation is false, an attempt to trigger renegotiation will result in the connection closure.

Please note that TLS renegotiation had a security issue before. If your runtime environment did not fix it, please make sure to disable TLS renegotiation by calling setEnableRenegotiation(boolean) with false. For more information, please refer to the following documents:

• CVE-2009-3555
• RFC5746
• Phased Approach to Fixing the TLS Renegotiation Issue

Closing the session

To close the SSL session, the close() method should be called to send the close_notify message to the remote peer. One exception is when you close the Channel - SslHandler intercepts the close request and send the close_notify message before the channel closure automatically. Once the SSL session is closed, it is not reusable, and consequently you should create a new SslHandler with a new SSLEngine as explained in the following section.

Restarting the session

To restart the SSL session, you must remove the existing closed SslHandler from the ChannelPipeline, insert a new SslHandler with a new SSLEngine into the pipeline, and start the handshake process as described in the first section.

Implementing StartTLS

StartTLS is the communication pattern that secures the wire in the middle of the plaintext connection. Please note that it is different from SSL · TLS, that secures the wire from the beginning of the connection. Typically, StartTLS is composed of three steps:

1. Client sends a StartTLS request to server.
2. Server sends a StartTLS response to client.
3. Client begins SSL handshake.

If you implement a server, you need to:

1. create a new SslHandler instance with startTls flag set to true,
2. insert the SslHandler to the ChannelPipeline, and
3. write a StartTLS response.

Please note that you must insert SslHandler before sending the StartTLS response. Otherwise the client can send begin SSL handshake before SslHandler is inserted to the ChannelPipeline, causing data corruption.

The client-side implementation is much simpler.

1. Write a StartTLS request,
2. wait for the StartTLS response,
3. create a new SslHandler instance with startTls flag set to false,
4. insert the SslHandler to the ChannelPipeline, and
5. Initiate SSL handshake by calling handshake().

Nested Class Summary

Nested classes/interfaces inherited from interface org.jboss.netty.channel.ChannelHandler

ChannelHandler.Sharable

Field Summary

Fields inherited from class org.jboss.netty.handler.codec.frame.FrameDecoder

cumulation, DEFAULT_MAX_COMPOSITEBUFFER_COMPONENTS

Constructor Summary

Constructors

Constructor and Description
SslHandler(SSLEngine engine) Creates a new instance.
SslHandler(SSLEngine engine, boolean startTls) Creates a new instance.
SslHandler(SSLEngine engine, boolean startTls, Executor delegatedTaskExecutor) Creates a new instance.
SslHandler(SSLEngine engine, Executor delegatedTaskExecutor) Creates a new instance.
SslHandler(SSLEngine engine, SslBufferPool bufferPool) Creates a new instance.
SslHandler(SSLEngine engine, SslBufferPool bufferPool, boolean startTls) Creates a new instance.
SslHandler(SSLEngine engine, SslBufferPool bufferPool, boolean startTls, Executor delegatedTaskExecutor) Creates a new instance.
SslHandler(SSLEngine engine, SslBufferPool bufferPool, Executor delegatedTaskExecutor) Creates a new instance.

Method Summary

Methods

Modifier and Type	Method and Description
void	afterRemove(ChannelHandlerContext ctx) Fail all pending writes which we were not able to flush out
void	beforeAdd(ChannelHandlerContext ctx)
void	channelClosed(ChannelHandlerContext ctx, ChannelStateEvent e) Loop over all the pending writes and fail them.
void	channelConnected(ChannelHandlerContext ctx, ChannelStateEvent e) Calls handshake() once the Channel is connected
void	channelDisconnected(ChannelHandlerContext ctx, ChannelStateEvent e) Invoked when a Channel was disconnected from its remote peer.
ChannelFuture	close() Sends an SSL close_notify message to the specified channel and destroys the underlying SSLEngine.
ChannelFuture	close(Channel channel) Deprecated. Use close() instead.
protected Object	decode(ChannelHandlerContext ctx, Channel channel, ChannelBuffer buffer) Decodes the received packets so far into a frame.
void	exceptionCaught(ChannelHandlerContext ctx, ExceptionEvent e) Invoked when an exception was raised by an I/O thread or a ChannelHandler.
boolean	getCloseOnSSLException()
static SslBufferPool	getDefaultBufferPool() Returns the default SslBufferPool used when no pool is specified in the constructor.
SSLEngine	getEngine() Returns the SSLEngine which is used by this handler.
ChannelFuture	getSSLEngineInboundCloseFuture() Return the ChannelFuture that will get notified if the inbound of the SSLEngine will get closed.
void	handleDownstream(ChannelHandlerContext context, ChannelEvent evt) Handles the specified downstream event.
ChannelFuture	handshake() Starts an SSL / TLS handshake for the specified channel.
ChannelFuture	handshake(Channel channel) Deprecated. Use handshake() instead.
boolean	isEnableRenegotiation() Returns true if and only if TLS renegotiation is enabled.
static boolean	isEncrypted(ChannelBuffer buffer) Returns true if the given ChannelBuffer is encrypted.
boolean	isIssueHandshake() Returns true if the automatic handshake is enabled
void	setCloseOnSSLException(boolean closeOnSslException) If set to true, the Channel will automatically get closed one a SSLException was caught.
void	setEnableRenegotiation(boolean enableRenegotiation) Enables or disables TLS renegotiation.
void	setIssueHandshake(boolean issueHandshake) Enables or disables the automatic handshake once the Channel is connected.

Methods inherited from class org.jboss.netty.handler.codec.frame.FrameDecoder

actualReadableBytes, afterAdd, appendToCumulation, beforeRemove, cleanup, decodeLast, getMaxCumulationBufferCapacity, getMaxCumulationBufferComponents, internalBuffer, isUnfold, messageReceived, newCumulationBuffer, replace, setMaxCumulationBufferCapacity, setMaxCumulationBufferComponents, setUnfold, unfoldAndFireMessageReceived, updateCumulation

Methods inherited from class org.jboss.netty.channel.SimpleChannelUpstreamHandler

channelBound, channelInterestChanged, channelOpen, channelUnbound, childChannelClosed, childChannelOpen, handleUpstream, writeComplete

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

SslHandler

public SslHandler(SSLEngine engine)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

SslHandler

public SslHandler(SSLEngine engine,
          SslBufferPool bufferPool)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

bufferPool - the SslBufferPool where this handler will acquire the buffers required by the SSLEngine

SslHandler

public SslHandler(SSLEngine engine,
          boolean startTls)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

startTls - true if the first write request shouldn't be encrypted by the SSLEngine

SslHandler

public SslHandler(SSLEngine engine,
          SslBufferPool bufferPool,
          boolean startTls)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

bufferPool - the SslBufferPool where this handler will acquire the buffers required by the SSLEngine

startTls - true if the first write request shouldn't be encrypted by the SSLEngine

SslHandler

public SslHandler(SSLEngine engine,
          Executor delegatedTaskExecutor)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

delegatedTaskExecutor - the Executor which will execute the delegated task that SSLEngine.getDelegatedTask() will return

SslHandler

public SslHandler(SSLEngine engine,
          SslBufferPool bufferPool,
          Executor delegatedTaskExecutor)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

bufferPool - the SslBufferPool where this handler will acquire the buffers required by the SSLEngine

delegatedTaskExecutor - the Executor which will execute the delegated task that SSLEngine.getDelegatedTask() will return

SslHandler

public SslHandler(SSLEngine engine,
          boolean startTls,
          Executor delegatedTaskExecutor)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

startTls - true if the first write request shouldn't be encrypted by the SSLEngine

delegatedTaskExecutor - the Executor which will execute the delegated task that SSLEngine.getDelegatedTask() will return

SslHandler

public SslHandler(SSLEngine engine,
          SslBufferPool bufferPool,
          boolean startTls,
          Executor delegatedTaskExecutor)

Creates a new instance.

Parameters:

engine - the SSLEngine this handler will use

bufferPool - the SslBufferPool where this handler will acquire the buffers required by the SSLEngine

startTls - true if the first write request shouldn't be encrypted by the SSLEngine

delegatedTaskExecutor - the Executor which will execute the delegated task that SSLEngine.getDelegatedTask() will return

Method Detail

getDefaultBufferPool

public static SslBufferPool getDefaultBufferPool()

Returns the default SslBufferPool used when no pool is specified in the constructor.

getEngine

public SSLEngine getEngine()

Returns the SSLEngine which is used by this handler.

handshake

public ChannelFuture handshake()

Starts an SSL / TLS handshake for the specified channel.

Returns:

a ChannelFuture which is notified when the handshake succeeds or fails.

handshake

@Deprecated
public ChannelFuture handshake(Channel channel)

Deprecated. Use handshake() instead.

close

public ChannelFuture close()

Sends an SSL close_notify message to the specified channel and destroys the underlying SSLEngine.

close

@Deprecated
public ChannelFuture close(Channel channel)

Deprecated. Use close() instead.

isEnableRenegotiation

public boolean isEnableRenegotiation()

Returns true if and only if TLS renegotiation is enabled.

setEnableRenegotiation

public void setEnableRenegotiation(boolean enableRenegotiation)

Enables or disables TLS renegotiation.

setIssueHandshake

public void setIssueHandshake(boolean issueHandshake)

Enables or disables the automatic handshake once the Channel is connected. The value will only have affect if its set before the Channel is connected.

isIssueHandshake

public boolean isIssueHandshake()

Returns true if the automatic handshake is enabled

getSSLEngineInboundCloseFuture

public ChannelFuture getSSLEngineInboundCloseFuture()

Return the ChannelFuture that will get notified if the inbound of the SSLEngine will get closed. This method will return the same ChannelFuture all the time. For more informations see the apidocs of SSLEngine

setCloseOnSSLException

public void setCloseOnSSLException(boolean closeOnSslException)

If set to true, the Channel will automatically get closed one a SSLException was caught. This is most times what you want, as after this its almost impossible to recover. Anyway the default is false to not break compatibility with older releases. This will be changed to true in the next major release.

getCloseOnSSLException

public boolean getCloseOnSSLException()

handleDownstream

public void handleDownstream(ChannelHandlerContext context,
                    ChannelEvent evt)
                      throws Exception

Description copied from interface: ChannelDownstreamHandler

Handles the specified downstream event.

Specified by:

handleDownstream in interface ChannelDownstreamHandler

Parameters:

context - the context object for this handler

evt - the downstream event to process or intercept

Throws:

Exception

channelDisconnected

public void channelDisconnected(ChannelHandlerContext ctx,
                       ChannelStateEvent e)
                         throws Exception

Description copied from class: SimpleChannelUpstreamHandler

Invoked when a Channel was disconnected from its remote peer.

Overrides:

channelDisconnected in class FrameDecoder

Throws:

Exception

exceptionCaught

public void exceptionCaught(ChannelHandlerContext ctx,
                   ExceptionEvent e)
                     throws Exception

Description copied from class: SimpleChannelUpstreamHandler

Invoked when an exception was raised by an I/O thread or a ChannelHandler.

Overrides:

exceptionCaught in class FrameDecoder

Throws:

Exception

isEncrypted

public static boolean isEncrypted(ChannelBuffer buffer)

Returns true if the given ChannelBuffer is encrypted. Be aware that this method will not increase the readerIndex of the given ChannelBuffer.

Parameters:

buffer - The ChannelBuffer to read from. Be aware that it must have at least 5 bytes to read, otherwise it will throw an IllegalArgumentException.

Returns:

encrypted true if the ChannelBuffer is encrypted, false otherwise.

Throws:

IllegalArgumentException - Is thrown if the given ChannelBuffer has not at least 5 bytes to read.

decode

protected Object decode(ChannelHandlerContext ctx,
            Channel channel,
            ChannelBuffer buffer)
                 throws Exception

Description copied from class: FrameDecoder

Decodes the received packets so far into a frame.

Specified by:

decode in class FrameDecoder

Parameters:

ctx - the context of this handler

channel - the current channel

buffer - the cumulative buffer of received packets so far. Note that the buffer might be empty, which means you should not make an assumption that the buffer contains at least one byte in your decoder implementation.

Returns:

the decoded frame if a full frame was received and decoded. null if there's not enough data in the buffer to decode a frame.

Throws:

Exception

beforeAdd

public void beforeAdd(ChannelHandlerContext ctx)
               throws Exception

Specified by:

beforeAdd in interface LifeCycleAwareChannelHandler

Overrides:

beforeAdd in class FrameDecoder

Throws:

Exception

afterRemove

public void afterRemove(ChannelHandlerContext ctx)
                 throws Exception

Fail all pending writes which we were not able to flush out

Specified by:

afterRemove in interface LifeCycleAwareChannelHandler

Overrides:

afterRemove in class FrameDecoder

Throws:

Exception

channelConnected

public void channelConnected(ChannelHandlerContext ctx,
                    ChannelStateEvent e)
                      throws Exception

Calls handshake() once the Channel is connected

Overrides:

channelConnected in class SimpleChannelUpstreamHandler

Throws:

Exception

channelClosed

public void channelClosed(ChannelHandlerContext ctx,
                 ChannelStateEvent e)
                   throws Exception

Loop over all the pending writes and fail them. See #305 for more details.

Overrides:

channelClosed in class FrameDecoder

Throws:

Exception